Cabinet Refacing in Smyrna, GA
Use Smyrna Cabinet Source to ask about cabinet Refacing in Smyrna, including available providers and the assessment needed for your room. Many Smyrna condos built in the early 2000s still have builder-grade cabinets with thermofoil doors that peel at the edges, revealing worn particleboard underneath. The boxes remain solid, the layout works, and the countertop is intact. Cabinet refacing in Smyrna, GA lets you replace just the visible surfaces, avoiding demolition, debris, and the need to coordinate with building management.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our cabinet refacing
For cabinet Refacing in Smyrna, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope. We plan refacing around elevator access, noise limits, and association rules so your kitchen update feels like a quiet renovation, not a disruption. Schedule a design visit to see how your existing boxes can be renewed without a full replacement.
Why Smyrna Cabinet Source
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Refacing without an elevator haul-out
In a Cumberland condo, the elevator is a shared resource, and its schedule is tightly controlled. A full cabinet replacement requires multiple trips: hauling out old boxes, bringing in new ones, and removing debris. Each trip needs approval and blocks the elevator for hours. Refacing eliminates this entirely. Only the new doors, drawer fronts, and veneer panels are delivered in a single visit. The old components stay in place until they are peeled off and bagged on-site. No demolition means no debris removal and no waiting for elevator availability. The entire process can be completed in two days with minimal disruption to neighbors.
Peeling thermofoil, sound boxes
Builder-grade cabinets from the 1990s to early 2000s in Smyrna condos typically use particleboard boxes with thermofoil door fronts. The thermofoil, a thin plastic laminate, is prone to lifting at the edges, especially near sinks or stoves where moisture accumulates. The underlying particleboard, however, rarely shows signs of structural failure. It holds its shape, resists warping in Cobb County's humidity, and retains its fasteners. This is the ideal condition for refacing. Confirm who will handle the proposed Smyrna work for cabinet Refacing in Smyrna, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor. If the box is sound, we clean it, apply a durable adhesive, and bond new doors and drawer fronts directly over the old surfaces. The result is a kitchen that looks custom, with no change to the cabinet footprint or internal storage.
Keeping the countertop and the approval count
Replacing countertops in a condo often requires a second trade, additional fees, and a second HOA approval. Many associations restrict work that alters the floor plan or structural elements, and removing a countertop can trigger a review. Refacing preserves the existing countertop, whether it's laminate, quartz, or solid surface. This avoids the need for a second contractor, eliminates the risk of damaging the edge during removal, and reduces the total number of approvals required. Use the cabinet Refacing in Smyrna inquiry to check service availability, product selection and project responsibilities before arranging work or placing an order. The transition between cabinet and countertop remains seamless, and the overall look is upgraded without the complexity of a full remodel.
Refacing cost for a condo kitchen
For cabinet Refacing in Smyrna, request an itemized quote showing box sizes, door and drawer choices, fittings, finish and installation scope rather than relying on a general price range. A basic refacing with thermofoil or vinyl-wrapped doors on a standard 10-foot run falls toward the lower end. Upgrading to painted maple, stained white oak, or inset raised panel doors increases the cost. Frameless, full-overlay doors offer a modern look and are commonly selected in newer condos. Plywood boxes are not needed for refacing since the existing particleboard is retained. Soft-close hinges and undermount drawer slides are added to every door and drawer as standard. Hardware, crown molding, and light rail are optional upgrades. The cost does not include countertop work, plumbing changes, or electrical updates. These figures are estimates for cabinet refacing in Smyrna, GA, subject to change, and the written quote after the field measure sets the final price.
A refacing job that keeps the counters and the boxes cuts both the disruption and the approval risk. Because nothing in the casework or the countertop changes, the HOA sees a finish update rather than a construction job, and the elevators stay available for residents. The finish itself is where the payoff sits: a peeling thermofoil door is replaced with a painted or wood-finish front on the same sound box, and the room reads as updated without the haul-out of a full replacement.
Refacing also protects the schedule and the approvals. Because the boxes and the countertop stay put, the work can start and finish without the elevator reservation or the unit-wide construction notice a full rip-out would trigger, and the same box that would otherwise go to a landfill stays in the wall. The finish is chosen to the room, and the replaced fronts and drawer boxes are installed to the existing frames so the closet spaces, the plumbing, and the building approvals all stay as they are.
Refacing keeps the building as it is, which is often the whole point in an occupied condo. The boxes, the plumbing, and the countertop stay, so the work reads as a finish update and the elevator and the approvals stay on the resident schedule instead of a construction one. The new fronts and hardware are installed to the existing frames, and the cost reflects the smaller scope of a reface rather than a full rip-out.
The same kitchen, refaced
BeforeAfterThe process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Cabinet Refacing: Common Questions
Can you reface cabinets in a condo without damaging the walls?
Yes. Refacing requires no wall removal or structural changes. Confirm who will handle the proposed Smyrna work for cabinet Refacing in Smyrna, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor. The cabinets remain mounted to the wall throughout the process, so there is no risk of damaging drywall or plumbing stubs behind them.
How long does a refacing job take in a condo?
Most condo refacing projects are completed in two to three days. The first day is for removing old doors and drawer fronts and preparing the box surfaces. The second day is for installing new components and adjusting hardware. A third day may be needed if crown molding or light rail is added. Use the cabinet Refacing in Smyrna inquiry to check service availability, product selection and project responsibilities before arranging work or placing an order.
Do you offer painted or stained options for refacing?
Yes. For cabinet Refacing in Smyrna, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope. The finish is applied in a climate-controlled environment to ensure even curing, then installed on-site. All finishes are sealed for moisture resistance, which is important in Smyrna's humid summers.
What if my cabinet boxes are damaged?
Confirm who will handle the proposed Smyrna work for cabinet Refacing in Smyrna, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor. If there is water damage, warping, or broken joints, we note it in the quote. Minor repairs can be made on-site using wood filler and reinforcement. If the damage is extensive, we recommend replacing the affected box as part of the refacing scope. This is rare in condos built after 1995.
Do you handle HOA paperwork for refacing?
Use the cabinet Refacing in Smyrna inquiry to check service availability, product selection and project responsibilities before arranging work or placing an order. For cabinet Refacing in Smyrna, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope.
Is refacing a good option if I plan to sell my condo?
Yes. Refacing gives a high-impact visual upgrade at a fraction of the cost of replacement. Buyers in Smyrna recognize the quality of a refaced kitchen with new doors, soft-close hardware, and updated finishes. It signals maintenance without the disruption of a full renovation, which appeals to buyers in occupied buildings.
Talk to us about cabinet refacing
Tell us about the room, in Smyrna or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.